sv4me
|
Buell Sightings...Spotted a Buell today??? Post it up and see if it's someone you know...
|
sv4me
|
Spotted a Buell on the Warrego H/way (heading to Brissy) on my way out to Gatton at about 8:15am today. Anyone from here???
|
Sprocket
|
It's not often that i see another Buell, But today i did! Black with orange stickers XB12s? coming through Kangaroo Flat at about 3pm heading towards Bendigo, at first i thought it was Aussie coming from my joint? But he/she? wasn't on one wheel! 
|
ajturbo
|
saw one at the pub this morning.. the "sand bar" in Mana, wellington NZ..
|
joesbuell
|
I saw one today...In my shed!
|
TEZZA
|
A black City-X in Warwick on Saturday 31-05-08.
|
Murdoch
|
2 in the Ulysses annual club run (out of a few thousand)
Both Ulysses models................Ulysses on an Ulysses
One orange, one black
|
ajturbo
|
too wet and cold here.. to even think about goging to the garage..let alone go for a ride... 
|
sv4me
|
Saw a lady on a blue Buell at Bowen Hills about 10am today. She was riding with a bloke on a Bimmer.
Cheers 
|
Murdoch
|
| sv4me wrote: | Saw a lady on a blue Buell at Bowen Hills about 10am today. She was riding with a bloke on a Bimmer.
Cheers |
What colour was it 
|
sv4me
|
| Murdoch wrote: | | sv4me wrote: | Saw a lady on a blue Buell at Bowen Hills about 10am today. She was riding with a bloke on a Bimmer.
Cheers |
What colour was it |
It also had heaps of stickers on the rear subframe.
|
ajturbo
|
Ruapuna race way ... yesterday
the guy was flying.... (X1 i think, chain drive)
|
sv4me
|
Black Buell taking the Hershel (sp) St. exit at about 9.15am on the M1 in Brissy today.
Cheers.
|
SVBLK
|
Grey/Black 1125 Buell on the Monash/Sth Gippie Hwy, Hastings area. Was going like a bullet!!
|
Bueller
|
Black Ligntning travels east along Moreland Rd at 8-8:30 am every morning. Open face, beard, recently started smoking, even in the rain.
|
Fuzz
|
Recent sightings, in a normally "one horse" town:
Blue CityX, 
Yellow XB12R,
White XB9R,
My first look at an 1125R, 
all of which went past the auto parts store while I was working 
|
Meteor
|
| Bueller wrote: | | Black Ligntning travels east along Moreland Rd at 8-8:30 am every morning. Open face, beard, recently started smoking, even in the rain. |
LOL Remember those ads in Easy Rider magazine "..Who Sez you can't smoke at 60 mph?". There was another one for some knuckle-dusters "...goin' into a rough neighbourhood?"
Must be a great feeling, riding along smoking in the rain...
|
Tel
|
Me on the back roads of southern Tasmania fanging yesterday. Saw many other bikes, no Buells. There is a lady getting around on a Buell that I saw on the east coast a little while back, can't remember the colour of the bike. She'd been doing the coffee thing at Orford.
|
Bueller
|
| Meteor wrote: | | Bueller wrote: | | Black Ligntning travels east along Moreland Rd at 8-8:30 am every morning. Open face, beard, recently started smoking, even in the rain. |
LOL Remember those ads in Easy Rider magazine "..Who Sez you can't smoke at 60 mph?". There was another one for some knuckle-dusters "...goin' into a rough neighbourhood?"
Must be a great feeling, riding along smoking in the rain... |
I had friends who drilled holes in their full face helmets.
|
sv4me
|
Bloke on a Buell with an open face lid gave me a nod on the service road near Moss St. this morning, about 9ish. Geez, V-twins sound the best!!! 
|
Meteor
|
Saw a nice looking XB12 parked outside the Rose hotel in Williamstown on Sunday arvo. I was on a break from rehearsal at Williamstown Little Theatre, and as the sun had suddenly popped out (for the first time in days), thought I'd take a quick blast down to the Willy promenade.
|
SVBLK
|
Saw an XB9 or 12, Blue in colour on the tele, Ten news yesterday here in Vic. Was in city out front of the courts.
|
Meteor
|
| SVBLK wrote: | | Saw an XB9 or 12, Blue in colour on the tele, Ten news yesterday here in Vic. Was in city out front of the courts. |
"The Defendant"?!
|
LeatherPants
|
Red XB9R at Two Pines today... and again heading into Murwillumbah... Riding with a Duc and a Kwaka...
LP
|
Tel
|
Haven't seen another one down here for ages! A white Firebolt, on his way to work, Tasman Highway, Midway Point.
|
SVBLK
|
XB9 at moto gp on the sunday, had a pack & rack on the back. It was out the back of one of the tents along Gardener straight.
|
Auto XBR1500
|
Buell sightingsI am a new member but a long time v twin owner ...mm 38 years ..yikes !
I was riding a little 500 single ..sorry ...but there was 5 Buells on Mt Glorious today
Inc 2 Ms2 one was orange frame and gray with low SG suspension
a mad guy with half the airbox missing on an XB12 [ were the laughing gas goes apparenty ] and a near new yellow XB12 um ask me why I was riding the single ..not
|
andyt
|
Spotted Tel Mes thinks Tasman highway (Black Charlies) Sunday 26th Oct at approx 3.00 pm ?? 
|
SVBLK
|
Spotted 1125R on Highbury Rd, turning left onto Huntingdale Rd Mt Waverley 4:15pm today.
Damn it looked HAWT & sounded even betterer 
|
Auto XBR1500
|
Click to download file
Ok if you see a highly modded yellow XB on the Pacific Hwy Sydney to Bris over ths weekend that will be me , after 9 months with the engine apart I am taking it 'home' to my bris address [ I up here working] its rego is GUN 90 as its is 90 in 1500cc
My cook has one too now its a Purple frame with white bodywork XI lightning regos is x1woo so if you see us west of Bris give us a wave
Rob n delish
|
Murdoch
|
Enjoy the ride
|
Fuzz
|
[quote="
Ok if you see a highly modded yellow XB on the Pacific Hwy Sydney to Bris over ths weekend that will be me , after 9 months with the engine apart I am taking it 'home' to my bris address [ I up here working] its rego is GUN 90 as its is 90 in 1500cc
My cook has one too now its a Purple frame with white bodywork XI lightning regos is x1woo so if you see us west of Bris give us a wave
Rob n delish[/quote]
Sounds like alot of fun, have a nice blat
|
Auto XBR1500
|
Pacific Hwy trip from the auto XBR man
Click to see full size image
To Steven Cutting [ Motorcycle Weponery ]
Cc to Revolution Accelerator USA
Rapid Bikes Aust
The Aussie V Twin web site
all my mates
My little afternoon ride on the ‘Yellow Bird II’ from Road Warriors Café just [north of Sydney] to Ipswich [west of Brisbane] 962 klm an 10.5 hours on the Pathetic Hwy [ Route 1 the Pacific Hwy ]
The story so far …
Purchased a stock , red , Buell XB12R with 3800klm in Mar 07 (its is an 06 model) expressly to build up a bike as a long term ownership project …a keeper.. I hated the red and was on e bay that day looking for yellow body work in the States , found it , a Race can and Race chip and a Pingle power shifter
The shifter is a long story but basically I had a bike to bike head on a few years ago ..not my fault, broke my left ankle and I am in extreme pain to change gear all day ….no way could I own a 600 super sport for example .Oh also I am 192cm tall and 120kg so I look like a bear on a bicycle on any sport bike , even on my FLSTC for that matter!
I have a background in racing air cooled flat six cars, and I have done well building racers for torque rather than horsepower especially as most Australian Circuits and public roads are full of ‘slow’ corners and overtaking
I was well aware the difference that a bolt in ‘crate’ 127 cid motor had made to my old Softy 80 cid FLSTC with 150000 MILES on it so I went looking for a similar transformation of the Buell
My previous Tube Frame X1 Buell went 90 HP at the back wheel with the usual can and chip and the XB handled and rode much better, less KGs but was way less phat in the going bit …
Harley dealers I spoke to and some ‘tuners’ were no help …’no one dooen much stuff for them XB yet mate, the case is lighter and less ridged than the old Sporty/ Buells ‘ ‘Why don’t u by a tubi ?’ …nah been there
Found Revolution in the States make lots of good bits with ‘nicasil’ bores , I knew this stuff with the Porsche engines since the 70s . Revolution also supply the factory Buell air cooled XBRR with a 80 CID set up so that’s a good recommendation ! The people there were great and I asked many many questions and traded e mail till I had the cam , bore, valves, springs, rockers and revs I was hopeful of !
I did a lot of modeling on the Porsche engine stuff I kept during the those racing years and with similar RPM range and a smaller cylinder volume in the air cooled , separate cylinder Porsche six all the exhaust systems I could find looked wrong to me. I reckoned on 140- 150 engine HP was possible , even allowing for the shared throttle body of the XB but I did not know how to discount for a twin over the Porsche 6
I found Trojan in the UK and they had a ‘Revso’ system used by their [ I think] Battle Twin winning Xbs …It looked the goods and their primaries were MASSIVE and a nice long secondary all the way down the engine trans unit before a light muffler and exit up the front. Looked good for torque and with a muffler ..they said it was race only ….yeh yeh !
I Met Steve (MCW ) and he was such a nice guy and asked lots of detailed questions… I was more than happy to hand him my fancy boxes of bits and pretty little bike
I have built several flat 6s but have no were to do engine work now and no experience with Hd engines after the 45 cid Flat head !
So the bike was apart for 9 months , with the majority of that to have the heads modified to fit the valves and cam profile to prevent a clash on overlap ..and there is lots of that !
Sat pick up / Sunday Ride
When Steve handed it over on Sat midday he looked at me sternly and said ‘Have you considered fitting a Jap front end and bks to it as I have run it out of brakes twice on my local test road , it is deceptive and accelerates without the revs ..I been caught out by it a few times going too fast for approaching corners ‘ ..My reaction …. Well yeh ! hand over the key !!
Steve it runs fine and for me as not at all expert rider it is intimidating pure intimidating past ¾ throttle …I have never slid , wheel spun a bike but in slow corners , roundabouts etc if you are tired after 10 hour ride and go for the throttle to stand the bike up on the exit the back seams to slip like a car down the camber and a judder when it hooks up ..is that sliding a bike ?? and at 120k when you grab the throttle full and it gets on the cam and gives a little weave and tosses its head as it comes straight is that wheel spin ? Yikes !
The standard clutch does need a BEX and a good lie down but I can fix that easily all this because we have increased the Capacity by 12% and increased the torque by 35 % to 100 lbft at the back wheel with a full of fuel mass of less than 200 kg this thing is quick all over
Overtaking
Say there are 2 trucks and a car with a van , single lane road , car coming in the distance and you want to overtake …that will be a 5th roll on sir from 3500 and by 4000 it will slip the back wheel , or slip the clutch or wheelie past the cars
So was it worth the money and time …well went up My Glorious today ….yea it was worth it
Rob
|
Aussie XB12SS
|
Mmmmmmmmmmmmmmmmm impressive.
Thanks very much for the write up.
Very impressed.
|
Murdoch
|
I agree.................
Very interesting write up 
Thank you 
 
|
